Assembly instructions


1. Clean:
- Use the included pre-cleaning cloth to thoroughly clean the surface of dirt and dust.

2. Spray:
- Spray transfer fluid generously onto the tray to achieve optimal coverage and an evenly wet surface.

3. Sticking:
- Carefully peel off the backing paper from the protective film.
- Spray the adhesive side of the film with transfer fluid as well.
- Place the protective film with the adhesive side on the tray, using the liquid for easy adjustment.
- Make sure that the film lies optimally on the surface.

4. Squeegeeing:
- Start squeegeeing immediately after application.
- Squeegee from the inside out.
- Make sure that the film does not slip.

5. Finished:
- Remove excess transfer fluid immediately with a kitchen towel to ensure optimal result quality.
- Allow the film to dry for about an hour before placing objects on it.